Product Overview
709-Plus Machine Tutorial Video
709PLUS High Power 2 In 1 Battery Spot Welding &Soldering Station Machine
Features:
1.The machine is a combination of battery spot welding and soldering of circuit boards. which
makes your work more convenient.
2.There are two methods of fixed spot welding and mobile spot welding, so that the welding will be flexible.
3.Possess the function of2,4.6,8 welding pulses selection,make the solder joint reliable. up o 18 pulses can be slacked.
4.Display real-time spot welding current and voltage,and monitor spot welding output parameters in real-time.
5.Fixed spot welding head pressure adjustment device, spot welding is more reliable.
6.Knob-type welding current regulator, current selection is fast and efficient.
7.Anti static constant temperature welding station with precise temperature control, suitable for any copper sheet and circuit welding.
8.External foot control switch can make the spot welding position more precise.
Application
Lithium battery pack
Strain gauge
Stainless steel mesh
Circuit board
Button battery
Welding parameters
Power supply :AC110V/220V±20V
Output power:4.2KW(Max.)
Welding current:50-800A
Welding thickness:0.05-0.35mm(fixed head)
0.05-0.2mm(spot welding pen)
Thermostatic soldering station parameters
Temperature of solder pen:150℃~450℃
Power of solder pen:50W
Time of temperature rising:Rise to 300 “C in 6-8s
Output voltage:DC 20V
Constant temperature accuracy:±5℃
Packing list:
1）709-Plus welding machine *1 set；
2）70B welding pen*1 pc
3)709-Plus Electric soldering iron *1 pc
4)Soldering iron bracket *1 pc
5）Pedal switch *1 pc
6）Welding pins for fixed head *4 pcs
7）Welding pins for 70B *2pcs
8）Nickel plated sample *100 pcs
9）6-section fixture *1 pc
10）Needle grinding machine*1pc
11）Fuse tube *2 pcs
12)Hex wrench *1 pc
13)Operation Manual*1 pc
Notices for using SUNKKO spot welding machine
1. In order to obtain good weld effect, please don't use the active socket,and should be used the wall socket to ensure stable power supply.
2.Because of the instant welding large current, rated current of tripping device of the leakage protection switch should be up to 40-63A.Lower than 40A will cause tripping.
3.Please set the pressure adjuster to the right parameter to avoid welding effect in not good.
4. Please keep the surface of welding pins clean and wipe off oxide with sand paper.
5.Please keep the welding pin in sharp shape.
6. Please do not worry about the lighting in flash. Spot welder is a high power machine and discharging high current instantaneously.Because this moment is in 20ms and it is normal.
