Why Do LiFePO4 Cell Voltages Bounce Back After Balancing? (Permanent Fix Guide)
Posted by SUNKKO Technical Team on 16th Nov 2026
If you run a battery repair shop, you’ve almost certainly run into this: you spend hours balancing a LiFePO4 pack, all cells read perfectly even when you finish… and the customer brings it back a week later with the same voltage gap.
It’s one of the most frustrating problems in small battery repair, and most of the time it’s not because your balancer is broken. It’s because you’re fixing the symptom, not the root cause.
In this guide, we’ll break down e
…
Active Balancer vs Charge-Discharge Equalizer: Which Is Right for Your Battery Repair Shop?
Posted by SUNKKO Technical Team on 11th Nov 2026
If you run a small battery repair shop or build battery packs regularly, voltage imbalance is probably one of the most common problems you deal with every week. A pack with uneven cell voltages loses range, delivers poor performance, and can even become unsafe over time.
The problem is, not all balancing tools solve the same issue. Many shop owners start with a cheap active balancer, only to find that the voltage drifts right back a few days later. Others jump straight to an expensive industrial
…
Implementation Of Battery Balancing Processing
19th Nov 2025
Implementation Of Battery Balancing Processing
1. Hardware implementation Balancing circuit: Design balancing circuits (such as resistors, capacitors, inductors, DC-DC converters, etc.) to achieve energy transfer or dissipation.
BMS (Battery Management System): BMS is responsible for monitoring the battery status and controlling the balancing process.
2. software implementation Balancing strategy: Based on parameters such as voltage, capacity, and temperature of the battery, formulate balanc
…
US Dollar