Product Overview
Features:
1.The unique battery tester can test the charging float voltage of the lithium battery and convert the internal resistance parameters through the charging current.
Application：
Welding parameters：
Power supply :AC110V/220V±20V
Output power:2.8KW(Max.)
Welding current:50-800A
Welding thickness ：0.05-0.2mm（pure nickle）
0.05-0.25mm（nickel plated）
Output voltage:DC 36V
Packing list:
1）788H-USB welding machine *1 set
2）Pedal switch *1 pc
3）Big Welding pins *4 pcs
4）Nickel plated sample *100 pcs
5）Banana cable*1 pair
6）6-section fixture *1 pc
7）Fuse tube *2 pcs
8)Hex wrench *1 pc
9)Operation Manual*1 pc
Notices for using SUNKKO spot welding machine
1. In order to obtain good weld effect, please don't use the active socket,and should be used the wall socket to ensure stable power supply.
2.Because of the instant welding large current, rated current of tripping device of the leakage protection switch should be up to 40-63A.Lower than 40A will cause tripping.
3.Please set the pressure adjuster to the right parameter to avoid welding effect in not good.
4. Please keep the surface of welding pins clean and wipe off oxide with sand paper.
5.Please keep the welding pin in sharp shape.
6. Please do not worry about the lighting in flash. Spot welder is a high power machine and discharging high current instantaneously.Because this moment is in 20ms and it is normal.
